There are correct ways and wrong ways to clean antique wooden bar again. Given that the wood is very old, you should follow these tips to preserve your antique wood without diminishing its value. If you clean the wood incorrectly and it gets damaged, you can significantly decrease the value of the antique.
The first thing you should do is ask an expert if the old will be devalued if you clean it. If the antiques expert says its ok to clean the back bar, then ask them to give suggestions on a wood furniture cleaner correctly. You always use a quality wood cleaner and the expert should have a good recommendation. Do not use water to clean any part of the wood. Can damage and deforming the wood. Also, make sure that Sandy not old even though it is fastest so clean. Sanding devalue your old so it's not worth it.
For the next step, DAB a small amount of nail polish remover on a soft cloth and rub a small section of which is not obvious to the eye. If the wood still had a look and color out of the cloth is cleaned, probably has been treated with polyurethane. If this is the case, get the paint and varnish remover to clean the wood.
On the other hand, if the cloth was dirty after rubbing the enamel on wood has been treated with shellac and will need a re-clean furniture finisher.
Once you have done one of these steps and the wood is cleaned, rub tung oil above the ancient with another cloth. This will help preserve ancient wood wood, make it look better and moisturize the fibres which prevents it from cracking. This is all it takes to clean and maintain your old back bar effectively. It is better to rub tung oil on wood every couple of months to keep it looking fresh and clean.
This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.
Aucun commentaire:
Enregistrer un commentaire