Programming Steps in Using a CNC 1440 Lathe

The CNC 1440 lathe has made it convenient for craftsmen, builders, and manufacturers to cut and shape metal, wood, or plastic with great precision. The 1440 lathe, specifically, eliminates the need to constantly re-write programs for short runs. As a long time user would know, the machine must first be set up or programmed for the specific kind of cutting needed.

Programming a CNC lathe takes a few steps:

Parameters and tooling information are first set. This guides the machine about the tools used and how to move the material for cutting.
The type of material worked on must also be indicated in programming. This will aid the machine in estimating the speed necessary to cut the material accurately.
The operator has the option to set a facing mode. After setting up the machine with a facing tool, the CNC lathe can even out rough cuts and edges for a more consistent surface and finer finish.
To cut the outer dimension to its final size, the CNC 1440 lathe must be programmed for the outside turning process, with the necessary tools already in place. This can be done in two passes, the first of which sizes down the material by roughing out the outer edge; while the second finishes the edges with a smoother surface.
The lathe must also be programmed if the operator wants to cut the finished craftwork from the rest of the raw material. The operator simply activates a cut-off command.

To make a CNC lathe work, detailed programming must be inputted to produce the desired result. For short runs, however, the 1440 lathe makes it possible to eliminate the programming process by reverting back to its manual capabilities, saving time and effort on the part of the operator.

This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.